Order Products : sales@su-jiao.com
Isocor™ HW29TL
| Category: | Nylon 610 , Polyamide 610 |
| Manufacturer: | Shakespeare Monofilaments and Specialty Polymers |
| Trademark: | Isocor™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TvEB8f_Isocor-HW29TL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Isocor™ HW29TL is a ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. This resin is suitable for applications requiring low moisture absorption and greater dimensional stability. This resin can be processed using conventional techniques. Typical applications for Isocor™ HW29TL include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.07 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.1 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | -- | 1.4 | % | ASTM D570 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | 60.0 | 51.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | 300 | % | ASTM D638 |
| Flexural Modulus | 2000 | 1300 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles) | 6.00 | -- | mg | ASTM D1044 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 48 | 200 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 175 | 160 | °C | |
| 1.8 MPa, Unannealed | 66.1 | 60.0 | °C | |
| Melting Temperature | 215 | -- | °C | DSC |
| Injection | Dry | Unit | |
|---|---|---|---|
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Hopper Temperature | 79.4 | °C | |
| Rear Temperature | 221 to 243 | °C | |
| Middle Temperature | 227 to 260 | °C | |
| Front Temperature | 238 to 271 | °C | |
| Nozzle Temperature | 238 to 271 | °C | |
| Processing (Melt) Temp | 238 to 271 | °C | |
| Mold Temperature | 10.0 to 93.3 | °C | |
| Injection Pressure | 3.45 to 13.8 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD A 201 | RTP Company | Nylon 66 | RTP |
| SEPTON™ 4099 | Kuraray Co., Ltd. | SEEPS | SEPTON™ |
| TITANLENE® LDF 204GH | Lotte Chemical Titan (M) Sdn. Bhd. | LDPE | TITANLENE® |
| BMC 845 | Bulk Molding Compounds, Inc. | Vinyl Ester | BMC |
| Mablex PCX 20001 | Ravago Manufacturing Americas, LLC | PC+ABS | Mablex |
