Order Products : sales@su-jiao.com
ALCUDIA® HDPE C-220-N
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TthWTI_ALCUDIAHDPEC220N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® C-220-N is a high molecular weight, high density polyethylene compound designed to provide very low shrinkage during processing. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. The outstanding feature of this product is its mechanical properties, excellent outdoor weather resistance and very good processability TYPICAL APPLICATIONS Black jacketing of power and telecommunication cables. It is recommended a melt temperature between 190 - 220°C and the use of a screw L/D: 20 - 28. ALCUDIA® C-220-N meets the following specifications: ISO 1872 PE KHC 40/45 D003/006; ASTM D 1248 III, C4, Grade J5; VDE 0207 Teil3 2YM1. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.952 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.60 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (F0) | > 1000 | hr | ASTM D1693 |
| Carbon Black Content | 2.5 | % | ASTM D1603 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Retention of Mechanical Properties 1(110°C) | > 75 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (200°C) | > 30 | min | EN 728 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 27.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 800 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 2 | -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ISO 306/A |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.70 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 5.0E-3 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 - 220 | °C |
| Extrusion instructions |
|---|
| L/D Ratio: 20 to 28:1 |
| Note Message | |
|---|---|
| 1 . | 10 days |
| 2 . | 0 Failures |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultra Low Outgassing™ SCV-2590 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| CALIBRE™ IM 401-11 | Trinseo | PC | CALIBRE™ |
| Dryflex® 602750S | ELASTO | SEBS | Dryflex® |
| Durez® P23056NF | SBHPP | Phenolic | Durez® |
| LEXAN™ EXL4419 resin | SABIC Innovative Plastics | PC | LEXAN™ |
