Order Products : sales@su-jiao.com
Generic Polyolefin, Unspecified - Unspecified
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tt3Zvq_Generic-Polyolefin-Unspecified---Unspecified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Polyolefin, Unspecified - Unspecified This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.924 - 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 - 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 60 - 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 17.1 - 19.3 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 750 - 1750 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 780 - 800 | J/m | ASTM D256 |
| Dart Drop Impact (23°C) | 17.6 - 25.2 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 56.7 - 111 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 45.0 - 90.6 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 202 - 218 | °C | |
| Middle Temperature | 207 - 224 | °C | |
| Front Temperature | 213 - 229 | °C | |
| Nozzle Temperature | 210 - 227 | °C | |
| Mold Temperature | 37.8 - 37.9 | °C | |
| Injection Pressure | 5.31 - 7.16 | MPa | |
| Holding Pressure | 5.17 - 6.03 | MPa | |
| Back Pressure | 0.685 - 0.689 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Polyolefin, Unspecified - UnspecifiedThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIMONA® VERSADUR® PP-H 520 White | SIMONA AMERICA, Inc. | PP Homopolymer | SIMONA® VERSADUR® |
| UNISOFT TPE™ ST-65A-NT-2-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| NEXUS Reprocessed PPC 30/1 RBK G33 | Nexus Resin Group, LLC. | PP Copolymer | NEXUS Reprocessed |
| ALCOM® AWL 15/1 UV WT1471-04LB | ALBIS PLASTIC GmbH | ABS | ALCOM® AWL |
| Fainplast PVC MPH 75/T | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
