Order Products : sales@su-jiao.com
Diamond ABS 1000
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Diamond ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TshgeH_Diamond-ABS-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Diamond ABS 1000 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 51.7 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 2540 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, 3.18 mm | 78.0 | °C | |
| 1.8 MPa, Annealed, 3.18 mm | 92.8 | °C | |
| Vicat Softening Temperature | 104 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 85.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 190 to 250 | °C | |
| Middle Temperature | 190 to 250 | °C | |
| Front Temperature | 190 to 250 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Pressure | 48.3 to 75.8 | MPa |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2205 HF SE | RTP Company | PEEK | RTP |
| Prime PP COPP 792 | Primex Plastics Corporation | PP Copolymer | Prime PP |
| Cheng Yu PP229H | Cheng Yu Plastic Company Limited | PP, Unspecified | Cheng Yu |
| DAI-EL™ G-7452 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| DURAFIDE® 1130A64 | Polyplastics Co., Ltd. | PPS | DURAFIDE® |
