Order Products : sales@su-jiao.com
Shinblend® A781
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Shinkong Synthetic Fiber Corp. |
| Trademark: | Shinblend® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TsGuiH_Shinblend-A781.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Shinblend® A781 is a Polycarbonate + ABS (PC+ABS) material. It is available in North America for injection molding. Important attributes of Shinblend® A781 are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (250°C/5.0 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 49.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 40 | % | ASTM D638 |
| Flexural Modulus | 1930 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 68.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 3.18 mm | 380 | J/m | |
| -30°C, 3.18 mm | 430 | J/m | |
| -20°C, 3.18 mm | 480 | J/m | |
| 0°C, 3.18 mm | 580 | J/m | |
| 23°C, 3.18 mm | 670 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 125 | °C | |
| 1.8 MPa, Unannealed | 118 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.794 mm | HB | ||
| 1.59 mm | HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Baytec® SPR-256D | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| BESTNYL SE00VI01AHQ03 | Triesa Plastics | Nylon 66 | BESTNYL |
| Ebalta SG 198 / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| KRATON® G1701 M | Kraton Polymers LLC | SEPS | KRATON® |
| Magnobond 111-047 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
