Order Products : sales@su-jiao.com
Miramid® SE25CW
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | BASF Leuna GmbH |
| Trademark: | Miramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TsC0v1_Miramid-SE25CW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Miramid® SE25CW is a Polyamide 66 (Nylon 66) material filled with 25% glass fiber. It is available in Europe for injection molding. Important attributes of Miramid® SE25CW are:
Typical application of Miramid® SE25CW: Automotive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1320 | -- | kg/m³ | ISO 1183 1 |
| Water Absorption | ISO 62 2 | |||
| Saturation | 5.8 | -- | % | |
| Equilibrium | 1.7 | -- | % | |
| Viscosity number | 145 | -- | cm³/g | ISO 307, 1157, 1628 3 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 8000 | 6000 | MPa | ISO 527-2 4 |
| Tensile Stress (Break) | 170 | 120 | MPa | ISO 527-2 5 |
| Tensile Strain (Break) | 3.0 | 4.0 | % | ISO 527-2 6 |
| Flexural Stress 7 | 250 | 180 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 8 | |||
| -30°C | 6.00 | -- | kJ/m² | |
| 23°C | 8.50 | 10.0 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 9 | |||
| -30°C | 45.0 | -- | kJ/m² | |
| 23°C | 60.0 | 75.0 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 10 | |||
| 0.45 MPa | 250 | -- | °C | |
| 1.8 MPa | 250 | -- | °C | |
| Melting Temperature (DSC) | 260 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume resistivity | 1.0E+13 | 1.0E+10 | ohms·m | IEC 60093 11 |
| Dielectric Constant (1 MHz) | 3.50 | 5.50 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.015 | 0.30 | IEC 60250 12 | |
| Comparative tracking index | 450 | -- | IEC 60112 13 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 280 to 300 | °C | |
| Mold Temperature | 80.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Typical values for uncoloured product at 23°C |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRYCITE™ 8002.600 | The Dow Chemical Company | PS (GPPS) | TRYCITE™ |
| NEFTEKHIM PP 8340K | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| Estane® CP80AS2 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| LNP™ LUBRICOMP™ LCL36 compound | SABIC Innovative Plastics Europe | PEEK | LNP™ LUBRICOMP™ |
| OTECH TPR OTR0985-Insoles | OTECH Corporation | TPE | OTECH TPR |
