Order Products : sales@su-jiao.com
DURAFIDE® 6565A6
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Polyplastics Co., Ltd. |
| Trademark: | DURAFIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TrgW2Y_DURAFIDE-6565A6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Moldable at low temperature, Adhesion-enhanced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| UL File Number |
|
| Forms |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.96 | g/cm³ | ISO 1183 |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 125 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.0 | % | ISO 527-2 |
| Flexural Modulus | 18200 | MPa | ISO 178 |
| Flexural Stress | 165 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.5 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 275 | °C | ISO 75-2/A |
| CLTE | |||
| Flow | 1.0E-5 | cm/cm/°C | |
| Transverse | 3.0E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength (3.00 mm) | 16 | kV/mm | IEC 60243-1 |
| Dielectric Constant | IEC 60250 | ||
| 1 kHz | 5.40 | ||
| 1 MHz | 5.40 | ||
| Dissipation Factor | IEC 60250 | ||
| 1 kHz | 0.013 | ||
| 1 MHz | 5.0E-3 | ||
| Arc Resistance | 189 | sec | |
| Comparative Tracking Index | 225 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (310°C, 1000 sec^-1) | 280 | Pa·s | ISO 11443 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color Number | HF2000/HD9050 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TP6HPN (Series: EX/UV) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Bapolene® PP5072 | Bamberger Polymers, Inc. | PP Impact Copolymer | Bapolene® |
| Gallonprene® GP210-6510 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Infino GP-5150GT | SAMSUNG SDI CO., LTD. | PBT | Infino |
| 3M™ Dyneon™ Fluoroelastomer FE 5522 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
