Order Products : sales@su-jiao.com
REVOLVE® N-109
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TrSkYS_REVOLVE-N-109.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve N-109 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, good flow characteristics without compromising impact strength. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 5.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 50.0 | hr | |
| 100% Igepal | 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 15.5 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 645 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (-40°C, 3.00 mm) | 90.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 47.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WELLAMID Nylon 6000 GV 15 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| Delrin® 150 NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Hostaform® C 9021 TF XAP² ™ | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| LNP™ LUBRICOMP™ UFL269SA compound | SABIC Innovative Plastics | PPA | LNP™ LUBRICOMP™ |
| Plenco 02369 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
