Order Products : sales@su-jiao.com
Crystal Clear® 221
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | Crystal Clear® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tr88ya_Crystal-Clear-221.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Crystal Clear® 220 & 221 are water white clear resins made specifically for applications that require absolute clarity. These are"heat cure" systems and are harder versions of our popular Crystal Clear® Series resins (Shore 85D). Cured castings are UV Resistant (resists yellowing due to ultra-violet light exposure) and are not brittle. Vibrant colors and color effects are achieved by adding pigment dispersions. Applications include encapsulation, making prototype models, lenses, sculpture reproductions, decorative cast pieces, jewelry, special effects and props. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D1475 |
| Specific Volume | 0.936 | cm³/g | ASTM D1475 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Demold Time | Overnight Followed By Post-Cure |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Casting Thickness | Variable | in | |
| Mixing Ratio | 100A:75B by weight |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 1.7 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 197 | MPa | ASTM D638 |
| Tensile Strength (Break) | 56.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 12 | % | ASTM D638 |
| Flexural Modulus | 2100 | MPa | ASTM D790 |
| Flexural Strength | 78.6 | MPa | ASTM D790 |
| Compressive Modulus | 600 | MPa | ASTM D695 |
| Compressive Strength | 69.6 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life | 75 | min | |
| Thermoset Mix Viscosity | 675 | cP | ASTM D2393 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene T40P200-01 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| SOLPLAST TH 7000B | UTEKSOL d.o.o. | SBS | SOLPLAST TH |
| Iupilon® MB5002R | Mitsubishi Engineering-Plastics Corp | PC+Polyester | Iupilon® |
| Braskem PE HT5303 | Braskem | HDPE | Braskem PE |
| RONFALIN® ABS 1261 | A. Schulman Europe | ABS | RONFALIN® |
