Order Products : sales@su-jiao.com
Eleme HPG00340
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Eleme Petrochemical Company Ltd |
| Trademark: | Eleme |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ti35wA_Eleme-HPG00340.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Small/medium diameter pipe for potable water system, OFC ducts, sewage and irrigation areas. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.942 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.28 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ASTM D1706 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Apparent Bending Modulus | 580 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 119 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2101 TFE 15 | RTP Company | PEI | RTP |
| 4LAC® 25H50600 | 4Plas | ABS | 4LAC® |
| ISPLEN® PB 181 N2M | REPSOL | PP Impact Copolymer | ISPLEN® |
| Plaslube® PA6 TSX15 | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
| PLUSTEK RA303G33 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
