Order Products : sales@su-jiao.com
DOW™ LDPE PG 7008 (Durables)
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ThtOzU_DOW-LDPE-PG-7008-Durables-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW LDPE™ PG 7008 Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Complies with:
Applications:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.7 | g/10 min | ISO 1133 |
| Spiral Flow | 105 | cm | Internal Method |
| Molding Shrinkage - Flow 1(220°C) | 2.6 | % | ASTM D955 |
| Environmental Stress-Cracking Resistance 2(50°C, 0.5% Antarox, Compression Molded) | 9.20 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 9.00 | MPa | |
| Break, Compression Molded | 10.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 350 | % | ASTM D638 |
| Flexural Modulus - 2% Secant (Compression Molded) | 200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 145 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ISO 306/A |
| Note Message | |
|---|---|
| 1 . | 0.5 seconds injection. |
| 2 . | Notched |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL STAR™ S 218 V30 BLACK 31 N | Solvay Engineering Plastics | Nylon 6 | TECHNYL STAR™ |
| Crastin® SK642FR NC010 | DuPont Performance Polymers | PBT | Crastin® |
| Generic Nylon, Unspecified | Generic | Nylon, Unspecified | Generic |
| HiFill FR® ABS FR AS | Techmer Engineered Solutions | ABS | HiFill FR® |
| INLUBE PA66GF30TF15IM | Infinity LTL Engineered Compounds | Nylon 66 | INLUBE |
