Order Products : sales@su-jiao.com
RELENE® 1035FS20
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TguBAR_RELENE-1035FS20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 1035FS20 is a film grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer has been blended with necessary additives during manufacture to obtain good surface slip and easy openability between two layers of the film. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 190 | MPa | |
| TD : Break, 40 µm, Blown Film | 170 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 250 | % | |
| TD : Break, 40 µm, Blown Film | 400 | % | |
| Dart Drop Impact (40 µm, Blown Film) | 100 | g | ASTM D1709A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 225 Z | RTP Company | Nylon 66 | RTP |
| TEKNIFLEX® MED 3012-0180 | Tekni-Films, a div of Tekni-Plex | Film, PP | TEKNIFLEX® MED |
| ALTECH® PBT + ASA A 4212/506 GF3MR9 | ALBIS PLASTIC GmbH | PBT+ASA | ALTECH® PBT + ASA |
| Elastron® V V601.A80.N | Elastron USA, Inc. | TPV | Elastron® V |
| Epolene® N-34P | Westlake Chemical Corporation | LDPE | Epolene® |
