Order Products : sales@su-jiao.com
Halene P M312
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TgaqIA_Halene-P-M312.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M312 is a Heterophasic Polypropylene Impact Copolymer (PPiCP), produced by the latest generation Spheripol II Technology. This PPiCP is primarily suitable for Injection Molding process. M312 combines excellent processability with high Flow, low Cycle Time, good Impact - Stiffness balance and good Gloss. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 7.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1000 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 120 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 145 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 250 | °C | |
| Middle Temperature | 160 to 250 | °C | |
| Front Temperature | 160 to 250 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 1002 | RTP Company | PBT | RTP |
| ADDILENE H 442 M30 | ADDIPLAST | PP Homopolymer | ADDILENE |
| apirex® MBL 25 M | API SpA | TPU-Polyether | apirex® |
| ATTANE™ 4606G | The Dow Chemical Company | ULDPE | ATTANE™ |
| DynaChar™ 2321 | Polymer Dynamix | PEBA-Ether | DynaChar™ |
