Order Products : sales@su-jiao.com

NuSil CV-2948

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TgVYE2_NuSil-CV-2948.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 2.0 W/m-K, Primed Lap Shear 150 psi (1.0 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 2.0 W/m-K, Primed Lap Shear 150 psi (1.0 MPa)

General Information
Features	Low to No Outgassing Thermally Conductive
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	2.0	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.20

Additional Information	Nominal Value	Unit
Cure System	Alkoxy

Uncured Properties	Nominal Value	Unit
Color	White
Density	1.57	g/cm³
Curing Time (23°C)	1.7E+2	hr
Pot Life	150	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	80
Lap Shear Strength ¹	1.03	MPa
Tensile Strength	1.72	MPa
Tensile Elongation at Break	30	%
Tear Strength	7.88	kN/m

Note Message
1 .	Primed with SP-130

Resin Grade	Manufacturer	Category	Trademark
PRL NY66-G13-(color)H	Polymer Resources Ltd.	Nylon 66	PRL
TEREZ PA 6.6 7530 GF 30	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
Braskem PE SGD4960	Braskem America Inc.	HDPE	Braskem PE
HiFill® HDPE GF25 CC	Techmer Engineered Solutions	HDPE	HiFill®
ALCOM® PA6 900/5.2 CF/MR25	ALBIS PLASTIC GmbH	Nylon 6	ALCOM® PA6