Order Products : sales@su-jiao.com
POLIMAXX V7030J
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | IRPC Public Company Limited |
| Trademark: | POLIMAXX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TfPaEA_POLIMAXX-V7030J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLIMAXX V7030J is a Low Density Polyethylene product. It is available in Asia Pacific, Europe, or North America. Typical application: Foam. Primary characteristic: good processability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.945 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 22.0 | MPa | |
| Break | 10.5 | MPa | |
| Tensile Elongation (Break) | 72 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 111 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® L L-R3-EI | Evonik Industries AG | Nylon 12 | VESTAMID® L |
| Formolene® L62009X | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Grilamid® XE 4188 black 9992 | EMS-GRIVORY | Nylon 612 | Grilamid® |
| OmniCarb™ PC10UV | OMNI Plastics, LLC | PC | OmniCarb™ |
| FuTuRe-PET® 1125 | Indorama Ventures Polymers México | PET | FuTuRe-PET® |
