Order Products : sales@su-jiao.com

NuSil CV-2287

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TevIDq_NuSil-CV-2287.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Low/High Temperature, Flowable, Fast Cure

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Low/High Temperature, Flowable, Fast Cure

General Information
Features	Fast Cure Good Flow Low to No Outgassing
Uses	Adhesives Aerospace Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit
CLTE - Flow	5.4E-4	cm/cm/°C

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.11	g/cm³
Viscosity	85	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	210	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	5.00	MPa
Tensile Elongation at Break	400	%
Tear Strength	9.63	kN/m
Electric Strength	35	kV/mm

Resin Grade	Manufacturer	Category	Trademark
SLOVAMID® 66 T 40 FRO 3	Plastcom	Nylon 66	SLOVAMID® 66
Zytel® 70G43HSLA BK099	DuPont Performance Polymers	Nylon 66	Zytel®
4MID® 9B22115	4Plas	Nylon 6	4MID®
APEX® 82-E254X-2NL	Teknor Apex Company	PVC, Flexible	APEX®
KRATON® D4274 B	Kraton Polymers LLC	SBS	KRATON®