Order Products : sales@su-jiao.com
Mediprene® 880161
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Mediprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TVFW0y_Mediprene-880161.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Preliminary datasheet Mediprene® 880161: Thermoplastic Elastomer Basic material: TPS-SBS Hardness: 50 Shore A (4 mm) Service temperature range: -50 -- +75°C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Moderate Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Special Features: The material is based on medically approved raw materials. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% Secant | 0.900 | MPa | |
| 300% Secant | 2.00 | MPa | |
| Tensile Strength | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 900 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 65.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 75 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 to 200 | °C | |
| Middle Temperature | 170 to 200 | °C | |
| Front Temperature | 170 to 200 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 190 | °C | |
| Cylinder Zone 2 Temp. | 150 to 190 | °C | |
| Cylinder Zone 3 Temp. | 150 to 190 | °C | |
| Cylinder Zone 4 Temp. | 150 to 190 | °C | |
| Cylinder Zone 5 Temp. | 150 to 190 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santron IMS1000 | Bhansali Engineering Polymers Limited | SAN | Santron |
| THERMOLAST® K TC9FRN (Series: FR) | KRAIBURG TPE | TPE | THERMOLAST® K |
| TOTAL Polyethylene Lumicene® M 5220 M | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Generic Cellulose, Regenerated | Generic | Cellulose, Regenerated | Generic |
| Styropek® BF 295M | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
