Order Products : sales@su-jiao.com
Glastic® 1580
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TToSUS_Glastic-1580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic 1580 is an easily fabricated laminate that exhibits excellent flame resistance. This flame-resistant laminate meets the UL94 V0 specification of Underwriters Laboratories. This material was originally designed to meet the television industry's safety assurance requirements. Glastic 1580 has exceptional flame resistance, arc resistance and a high temperature capability for applications such as flyback transformers and arc stack assemblies. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.83 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (yield, 1.60mm) | 57.9 | MPa | ASTM D638 |
| Flexural Strength (yield, 1.60mm) | 170 | MPa | ASTM D790 |
| Compressive Strength (1.60 mm) | 215 | MPa | ASTM D695 |
| Shear Strength | 82.7 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (1.60 mm) | 480 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (1.60 mm) | 2.0E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.27 | W/m/K | ASTM C177 |
| RTI Elec (1.60 mm) | 120 | °C | UL 746 |
| RTI (1.60 mm) | 140 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| 1.60 mm, in Air | 17 | kV/mm | ASTM D149 |
| 1.60 mm, in Oil | 23 | kV/mm | ASTM D149 |
| Dissipation Factor | ASTM D150 | ||
| 1.60 mm, 60 Hz | 0.011 | ASTM D150 | |
| 1.60 mm, 1 MHz | 0.010 | ASTM D150 | |
| Arc Resistance (1.60 mm) | 181 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) (1.60 mm) | 500 | V | UL 746 |
| High Amp Arc Ignition (HAI) (1.60 mm) | 200 | UL 746 | |
| Hot-wire Ignition (HWI) (1.60 mm) | 300 | sec | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 | |
| Oxygen Index (1.60 mm) | 39 | % | ASTM D2863 |
| Additional Information |
|---|
| NEMA Grade: GPO-3Insulation Resistance, ASTM D257: 8.23e10 ohmsIgnition Time: 84 minBurn Time: 23 min |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PP 40 TALC | RTP Company | PP, Unspecified | RTP |
| RAMLLOY PVB702 | Polyram Ram-On Industries | ABS+Nylon | RAMLLOY |
| WEVO-CHEMIE Polyurethanes PU 925/1M/600 | WEVO-CHEMIE GmbH | PUR, Unspecified | WEVO-CHEMIE Polyurethanes |
| NuSil MED-4860 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| ADENE OMQB | A.D. Compound spa | PP Homopolymer | ADENE |
