Order Products : sales@su-jiao.com
CP PRYME® Polyethylene PE100HDC-.35FM
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chase Plastics Services Inc. |
| Trademark: | CP PRYME® Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TTGQmq_CP-PRYME-Polyethylene-PE100HDC--35FM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP PRYME® Polyethylene PE100HDC-.35FM is a High Density Polyethylene product. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.951 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 1(Break) | 1000 | % | ASTM D638 |
| Flexural Modulus | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FL 39 D | Versalis S.p.A. | LDPE | Riblene® |
| TECHNYL® C 548B BLACK | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| Adell Polyamide AT-33 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Advanced Composites BJ4H-CS BDX | Advanced Composites, Inc. | PP, Unspecified | Advanced Composites |
| Keltan® 1500R | LANXESS Buna GmbH | EPDM | Keltan® |
