Order Products : sales@su-jiao.com

ISPLEN® PP 045 G1E

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TNp66Y_ISPLEN-PP-045-G1E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PP 045 G1E is a medium melt flow rate polypropylene homopolymer. It offers excellent processing properties for production of tapes and monofilaments. It is formulated with an additive package suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS Low fibrillation tapes for textil uses Monofilaments and tapes for ropes and twines Extrusion general uses Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PP 045 G1E is a medium melt flow rate polypropylene homopolymer. It offers excellent processing properties for production of tapes and monofilaments. It is formulated with an additive package suitable for protecting the polymer during extrusion process and final use.

TYPICAL APPLICATIONS

Low fibrillation tapes for textil uses

Monofilaments and tapes for ropes and twines

Extrusion general uses

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	Unspecified Additive
Features	Food Contact Acceptable Good Processability Medium Flow
Uses	Monofilaments Rope Tape Twine
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Extrusion Filament Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	4.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	35.0	MPa	ISO 527-2
Flexural Modulus	1400	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	91.0	°C	ISO 75-2/B
Vicat Softening Temperature	153	°C	ISO 306/A

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
STERalloy™ FDG 2791	Hapco Inc.	TP, Unspecified	STERalloy™ FDG
Sumitomo Epoxy EM 7302XLD	Sumitomo Bakelite North America, Inc.	Epoxy	Sumitomo Epoxy
Ultrason® E KR 4113	BASF Corporation	PESU	Ultrason® E
BESTDUR THG6/02	Triesa Plastics	PBT	BESTDUR
CERTENE™ LLBF-118B	Muehlstein	LLDPE	CERTENE™