Order Products : sales@su-jiao.com
RTP 1386 TFE 15
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TMiSNY_RTP-1386-TFE-15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.56 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.010 to 0.050 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.020 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 29300 | MPa | ASTM D638 |
| Tensile Strength | 158 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 0.70 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 22100 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 241 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 270 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 266 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 288 to 321 | °C | |
| Middle Temperature | 288 to 321 | °C | |
| Front Temperature | 288 to 321 | °C | |
| Mold Temperature | 135 to 177 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3967H | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Bergamid™ A700 TM-YF | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Andur 2-92 AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Hanwha Total PP FB54NH | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| NORYL™ GNF3 resin | SABIC Innovative Plastics Asia Pacific | PPE+PS | NORYL™ |
