Order Products : sales@su-jiao.com
Formolene® 4143T
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TLESGQ_Formolene-4143T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Homopolymer for Injection Molded Applications Formolene® 4143T is a highly isotactic polypropylene for use in injection molded applications including cutlery and thin wall components. It contains a unique combination of stabilizers and additives, which provides excellent processability and good end use performance. It has increased mold release for good handling of components. Formolene® 4143T meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 6.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1860 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 27 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEFTEKHIM PP 8300J | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| ADEKA EP-4100TX | Adeka Corporation | Epoxy | ADEKA |
| HI-ZEX™ 537B | Prime Polymer Co., Ltd. | HDPE | HI-ZEX™ |
| POLYfill PPHC T8020 | Polykemi AB | PP, Unspecified | POLYfill |
| TechnoPet GF 45 2 0 | TechnoCompound GmbH | PET | TechnoPet |
