Order Products : sales@su-jiao.com
Acculam™ Phenolkraft Paper X/XX
| Category: | Phenolic , Phenolic |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TKf0IL_Acculam-Phenolkraft-Paper-X-XX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Phenolkraft X/ XX - Laminate sheet comprised of a phenolic resin binder and a saturating kraft (paper) substrate. It qualifies to NEMA X/XX and MIL-I-24768/11/12. This is a general purpose grade with good mechanical and electrical insulating properties. Its versatility, good machining characteristics and lower cost encourage its applications as switch plates, barriers, terminal strips, washers and other electrical components. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 1.3 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| 3.18 mm 1 | > 152 | MPa | |
| 3.18 mm 2 | > 172 | MPa | |
| Compressive Strength 3 | 234 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 27 | J/m | |
| -- 5 | > 29 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature Index | 140 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Breakdown | |||
| -- 6 | > 5000 | V | |
| A | > 40000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | > 360000 | g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity | IEC 60250 | ||
| -- 7 | 6.00 | ||
| -- 8 | 5.50 | ||
| Dissipation Factor | ASTM D150 | ||
| -- 9 | 0.050 | ||
| -- 10 | 0.045 |
| Note Message | |
|---|---|
| 1 . | CW-A |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| 6 . | D48/50 |
| 7 . | D24/23 |
| 8 . | A |
| 9 . | D24/23 |
| 10 . | A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 MG 30 | RTP Company | Nylon 66 | RTP |
| Prime PE HDPE 250 | Primex Plastics Corporation | HDPE | Prime PE |
| Network Polymers LDPE 10 0127 EVA | Network Polymers, Inc. | EVA | Network Polymers LDPE |
| Etinox® EK-8610 | Ercros, S.A. | PVC, Flexible | Etinox® |
| Iupilon® HL-3503 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
