Order Products : sales@su-jiao.com
Tekumid 6 BH30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TEKUMA Kunststoff GmbH |
| Trademark: | Tekumid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TIGzN3_Tekumid-6-BH30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tekumid 6 BH30 is a Polyamide 6 (Nylon 6) material. It is available in Europe. Primary attribute of Tekumid 6 BH30: Flame Rated. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melt Volume-Flow Rate (MVR) | 14.0 | -- | cm³/10min | ISO 1133 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 9800 | 6100 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 180 | 105 | MPa | ISO 527-2 |
| Tensile Creep Modulus (1 hr) | -- | 5100 | MPa | ISO 899-1 |
| Flexural Modulus | 8600 | 5100 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 10 | 10 | kJ/m² | |
| 23°C | 15 | 20 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 70 | 70 | kJ/m² | |
| 23°C | 80 | 95 | kJ/m² | |
| Notched Izod Impact Strength (23°C) | 15 | 20 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength (23°C) | 70 | 80 | kJ/m² | ISO 180/1U |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | -- | °C | ISO 75-2/A |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating (1.50 mm) | HB | -- | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Susteel® P-30-12 | TOSOH Corporation | PPS | Susteel® |
| UBE Nylon 5034 MTX1 | UBE Engineering Plastics, S.A. | Nylon 66/6 | UBE Nylon |
| CompaMid® PA 6.6 GF 25 | DimeLika Plast GmbH | Nylon 66 | CompaMid® |
| CYCOLAC™ INP449 resin | SABIC Innovative Plastics | ABS+SAN | CYCOLAC™ |
| PETILEN S 0564 | PETKIM Petrokimya Holding A.S. | HDPE | PETILEN |
