Order Products : sales@su-jiao.com
ISOTHANE® 1095AU-K8
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TGSoYS_ISOTHANE-1095AU-K8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISOTHANE 1095AU-K8 product is polyester poly(adipate)ester based thermoplastic polyurethanes. It exhibits excellent transparency, toughness, abrasive resistance, UV stability, and solvent resistance. The product can be injection molded and extruded. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (H-22 Wheel) | 50.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 11.0 | MPa | ASTM D412 |
| 100% strain | 12.0 | MPa | ASTM D412 |
| 300% strain | 25.0 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 50.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 490 | % | ASTM D412 |
| Tear Strength 1 | 176 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 32 | % | ASTM D395B |
| Injection instructions |
|---|
| Feed Zone: 200°CTransition Zone: 210°CMetering Zone: 210°CNozzle: 200°CCooling Time: 40 to 50 sec |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Raditer® B RV200 | Radici Plastics | PBT | Raditer® |
| Witcom PBT 2C-S | Witcom Engineering Plastics B.V. | PBT | Witcom PBT |
| Multi-Flex® TPE A7321 | Multibase, A Dow Corning Company | TPE | Multi-Flex® TPE |
| HiFill® PP GF/M35 CC BK | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| Plenco 07321 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
