Order Products : sales@su-jiao.com
Desmopan® DP 3868D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TGFQ6k_Desmopan-DP-3868D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; modified with ABS; good low-temperature flexibility; good wear resistance; Application; Ski boot shells; Injection molded engineering parts |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D, 23°C) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | DIN 53504 | ||
| Break, 23°C | 55.0 | MPa | |
| 100% Strain, 23°C | 29.0 | MPa | |
| 300% Strain, 23°C | 42.0 | MPa | |
| Tensile Strain 2(Break, 23°C) | 410 | % | DIN 53504 |
| Flexural Modulus 3(23°C) | 435 | MPa | ISO 178 |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 1.87 | GPa | |
| 20°C | 0.760 | GPa | |
| 60°C | 0.280 | GPa |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 110 | °C | |
| Processing (Melt) Temp | 230 to 245 | °C | |
| Mold Temperature | 40.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | 200 mm/min |
| 2 . | 200 mm/min |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® PM-6432 | Sumitomo Bakelite Co., Ltd. | Phenolic | Sumikon® |
| Thermylene® P4-9900-0520 | Asahi Kasei Plastics North America Inc. | PP, Unspecified | Thermylene® |
| CALIBRE™ 302EP-22 | Trinseo | PC | CALIBRE™ |
| Fluon® PTFE PA1025Z | Asahi Glass Co., Ltd. | PTFE | Fluon® |
| Sylvin 8260-65FUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
