Order Products : sales@su-jiao.com
Generic PC Alloy
| Category: | PC Alloy , Polycarbonate Alloy |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TDsmug_Generic-PC-Alloy.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PC Alloy This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 - 1.26 | g/cm³ | ASTM D792 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.60 - 0.61 | % | ASTM D955 |
| 23°C | 0.60 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 51.6 - 56.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.7 - 91 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2230 - 2410 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 76.5 - 86.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 92 - 710 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 123 - 132 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 104 - 129 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 - 120 | °C | |
| Drying Time | 3.5 - 6.0 | hr | |
| Rear Temperature | 250 - 265 | °C | |
| Middle Temperature | 250 - 271 | °C | |
| Front Temperature | 254 - 280 | °C | |
| Processing (Melt) Temp | 260 - 272 | °C | |
| Mold Temperature | 60.0 - 76.8 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PC AlloyThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 399 X 96252 | RTP Company | PC | RTP |
| Toyolac® TP70 | Toray Resin Company | ABS | Toyolac® |
| Dryflex® A2 600501 | ELASTO | SEBS | Dryflex® |
| KPOL-LDPE LD K-12/923 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| Iupiace® AP4 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
