Order Products : sales@su-jiao.com

CELLOMER® 2100

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Microcell Composite Company
Trademark:	CELLOMER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TBfinC_CELLOMER-2100.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
CELLOMER® (Microcell + Elastomer) For hot-pressing or injection foaming boards featuring anti-slippage and elasticity. Having adjustable stiffness when mixed with MCC's other special high polymer materials. Pre-formulated & pre-foamed SBS compounds in pellet Can be melt-blended with compactable polymer for making foamed boards /articles by hot-pressing or infection Varying hardness can be achieved with blends Superior recyclability and melt processing behavior compared with EVA. Features: Closed microcellular structure Resilience / Elasticity Non-toxic Anti-slippage Light weight Flexibility Highly elasticity & resilience.

Message

CELLOMER® (Microcell + Elastomer)

For hot-pressing or injection foaming boards featuring anti-slippage and elasticity. Having adjustable stiffness when mixed with MCC's other special high polymer materials.

Pre-formulated & pre-foamed SBS compounds in pellet

Can be melt-blended with compactable polymer for making foamed boards /articles by hot-pressing or infection

Varying hardness can be achieved with blends

Superior recyclability and melt processing behavior compared with EVA.

Features:

Closed microcellular structure

Resilience / Elasticity

Non-toxic

Anti-slippage

Light weight

Flexibility

Highly elasticity & resilience.

General Information
Features	Foamable Good Flexibility High Elasticity Non-Toxic Recyclable Material Resilient
Uses	Foamed Insulation Board
Forms	Pellets
Processing Method	Injection Molding Press Molding

Physical	Nominal Value	Unit
Density	0.930	g/cm³
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	3.6	g/10 min

Hardness	Nominal Value	Unit
Durometer Hardness (Shore A)	51

Elastomers	Nominal Value	Unit
Tensile Strength	6.51	MPa
Tensile Elongation (Break)	630	%
Tear Strength	36.1	kN/m

Resin Grade	Manufacturer	Category	Trademark
RTP 199 X 132495 A	RTP Company	PP, Unspecified	RTP
SLOVAMID® 66/6 FRC 3 TS	Plastcom	Nylon 66/6	SLOVAMID® 66/6
ADEKA EH-5030S	Adeka Corporation	Epoxy	ADEKA
Dutral® TER 6537	Versalis S.p.A.	EPDM	Dutral®
LEXAN™ HFD1910 resin	SABIC Innovative Plastics	PC	LEXAN™