Order Products : sales@su-jiao.com
apizero® AZ HLC200
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | API SpA |
| Trademark: | apizero® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SwkkDk_apizero-AZ-HLC200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
apizero®AZ HLC200 is an ethylene vinyl acetate copolymer (EVA) product,. It can be processed by injection molding and is available in Europe. Typical application areas are: consumer goods. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.210 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 2.10 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 210 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 9.00 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 24 hr | 18 | % | ASTM D395 |
| 50°C, 6 hr | 64 | % | ASTM D395 |
| Additional Information |
|---|
| Abrasion Resistance, DIN 53515, 10 N: 550 mm³Abrasion Resistance, DIN 53515, 5 N: 190 mm³Heat Stability, API Method, 24 hr, 70°C: 2.4 % ShrinkageHeat Stability, API Method, 40 hr, 70°C: 0.6 % ShrinkageHardness, Asker C, 15 sec: 61Linear Expansion: 1.6 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 90.0 - 100 | °C | |
| Processing (Melt) Temp | 90.0 - 105 | °C | |
| Mold Temperature | 175 - 185 | °C | |
| Injection Pressure | 8.00 - 10.0 | MPa | |
| Back Pressure | 0.00 - 2.00 | MPa | |
| Screw L/D Ratio | 18.0:1.0 to 20.0:1.0 |
| Injection instructions |
|---|
| Injection Speed: 6 to 15 g/secMold in AluminumMax locking pressure: 20 MPaCycle Time: 5 to 7 minFree nozzle (without valve) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1805A | RTP Company | PC+Acrylic | RTP |
| PROTEQ™ H16QM44 | Marplex Australia Pty. Ltd. | PP Homopolymer | PROTEQ™ |
| Thermylene® P-30TC-1156 | Asahi Kasei Plastics North America Inc. | PP, Unspecified | Thermylene® |
| Acculam™ Phenolfab Canvas | Accurate Plastics, Inc. | Phenolic | Acculam™ |
| Dryflex® A2 602601 | ELASTO | SEBS | Dryflex® |
