Order Products : sales@su-jiao.com

Queo™ 8203

Category:	Plastomer , Ethylene-based Plastomer
Manufacturer:	Borealis AG
Trademark:	Queo™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Stt1ZG_Queo-8203.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Queo™ 8203 is an ethylene based octene plastomer produced in a solution polymerisation process using a metallocene catalyst.

Supplied as free flowing pellets, Queo 8203 is designed to offer:

Favourable melt strength - processability balance.

Flexibility

Outstanding toughness and puncture resistance

Low temperature flex-cracking and impact resistance

Low dielectric constant and dissipation factor

High clarity

High filler and oil acceptance

Excellent polyolefin compatibility

Applications:
Demonstrated applications include :

Impact modification of PP

Roof coverings

Tunnel linings

Flexible low voltage insulation

Halogen free flame retardant compounds

Blow moulded articles

Soft foams

High strength flexible films

Specialty stretch film applications

Additives:

Queo 8203 contains processing stabilizers.

General Information
Additive	Impact Modifier Unspecified Stabilizer
Features	Flame Retardant Good Melt Strength Good Processability Good Toughness Halogen Free High Clarity Low Temperature Flexibility Low Temperature Impact Resistance Puncture Resistant
Uses	Compounding Film Foam
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	0.882	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance	> 1000	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Shore Hardness			ISO 868
Shore A	85
Shore D	< 30

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	22.0	MPa	ISO 527-2/5A
Tensile Strain (Break)	820	%	ISO 527-2/5A
Flexural Modulus	24.0	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (23°C)	No Break		ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -76.0	°C	ASTM D746
Vicat Softening Temperature	50.0	°C	ISO 306/A
Melting Temperature (DSC)	74.0	°C	ISO 11357

Resin Grade	Manufacturer	Category	Trademark
RTP VLF 80107 CC	RTP Company	PP, Unspecified	RTP
Small Boss RPVC002	Tongxiang Small Boss Special Plastic Products Co., Ltd.	PVC, Rigid	Small Boss
VICTREX® PEEK 150FW30	Victrex plc	PEEK	VICTREX® PEEK
NuSil MED16-6606	NuSil Technology	Silicone	NuSil
OP - PC - Unfilled 912	Oxford Polymers	PC	OP - PC - Unfilled