Order Products : sales@su-jiao.com
Braskem PP 6D20
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Stoggw_Braskem-PP-6D20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Braskem 6D20 Polypropylene Resin is intended for use in film and extrusion blow molding processes. It is especially suited for multilayered, barrier bottles. Main Characteristics:
Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.9 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1020 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 4 | ASTM D256A | ||
| -20°C | 64 | J/m | |
| 23°C | 59 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 5(0.45 MPa, Unannealed) | 83.9 | °C | ASTM D648 |
| Melting Temperature (DSC) | 148 | °C | ASTM D3417 |
| Note Message | |
|---|---|
| 1 . | Testing performed on ASTM D 638 Type I specimen, molded and tested in accordance with ASTM D 4101. Properties will vary with changes in molding conditions and aging time. |
| 2 . | Testing performed on ASTM D 638 Type I specimen, molded and tested in accordance with ASTM D 4101. Properties will vary with changes in molding conditions and aging time. |
| 3 . | Testing performed on ASTM D 638 Type I specimen, molded and tested in accordance with ASTM D 4101. Properties will vary with changes in molding conditions and aging time. |
| 4 . | Testing performed on ASTM D 638 Type I specimen, molded and tested in accordance with ASTM D 4101. Properties will vary with changes in molding conditions and aging time. |
| 5 . | Testing performed on ASTM D 638 Type I specimen, molded and tested in accordance with ASTM D 4101. Properties will vary with changes in molding conditions and aging time. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP548R | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| Hanwha Total PP TB54I | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| IDI BMC B30 (Glass Content 25%) | IDI Composites International | TS, Unspecified | IDI BMC |
| MAJORIS FT200 | AD majoris | PP, Unspecified | MAJORIS |
| Plenco 02571 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
