Order Products : sales@su-jiao.com
UBE Polyethylene V215
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SsI1L8_UBE-Polyethylene-V215.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene V215 is a Polyethylene material. It is available in North America for film extrusion. Primary attribute of UBE Polyethylene V215: Clarity. Typical application of UBE Polyethylene V215: Wrap |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 2.0 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 15.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 740 | % | ASTM D638 |
| Apparent Bending Modulus | 60.0 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 68.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide AG4K | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| Westlake LDPE EP310 | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| Fiberfil® J-68/25/E/SD | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| G-PAEK™ 1100ESG | Gharda Chemicals Ltd. | PEK | G-PAEK™ |
| KOCETAL® GF703 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
