Order Products : sales@su-jiao.com
VECTOR® 4111
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Dexco Polymers LP |
| Trademark: | VECTOR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SrXTeO_VECTOR-4111.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VECTOR® 4111 is a Styrene Isoprene Styrene Block Copolymer (SIS) product. It can be processed by blow molding, extrusion, or injection molding and is available in North America. Typical application: Food Contact Applications. Primary characteristic: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.928 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.2 to 1.4 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 38 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.90 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1200 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 149 to 204 | °C | |
| Mold Temperature | 10.0 to 40.6 | °C | |
| Injection Pressure | 34.5 to 138 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 25 to 75 | rpm | |
| Clamp Tonnage | 2.1 to 4.1 | kN/cm² | |
| Screw Compression Ratio | 2.0:1.0 to 3.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trexprene® A64BI | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| 4MID® 9A22330 | 4Plas | Nylon 66 | 4MID® |
| Edgetek™ TR2-10GF/000 NATURAL | PolyOne Corporation | Copolyester | Edgetek™ |
| KEBAFORM® C 3090(K) | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| ESTOPLAST XU 6250BB10 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
