Order Products : sales@su-jiao.com
Suprel® SVA 9812
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Axiall Corporation |
| Trademark: | Suprel® SVA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SniEVk_Suprel-SVA-9812.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Georgia Gulf Suprel® SVA-9812 Alloy is an extrusion grade thermoplastic designed for sheet or profile applications requiring high impact resistance. Key features of Suprel 9812 alloy are flame retardance and excellent toughness at both room temperature and low temperatures. Suprel 9812 has good extrusion characteristics including good thermal stability and high gloss. It is particularly well suited for profile extrusion because the combination of low die swell, good melt strength and good melt stiffness allow easy sizing of extruded profiles. Suprel 9812 alloy is available in a full range of colors, or as un-pigmented "natural" for coloring on-line with color concentrates. Typical applications include extruded sheet or profiles for use in construction, automotive, recreation, telecommunications or electrical products. Suprel 9812 can be used in exterior, weatherable applications if appropriate pigmentation is included. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 79 | ||
| Shore D, 15 sec | 74 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2320 | MPa | ASTM D638 |
| Tensile Strength | 44.8 | MPa | ASTM D638 |
| Flexural Modulus | 2250 | MPa | ASTM D790 |
| Flexural Strength | 63.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C, 3.18 mm | 430 to 590 | J/m | |
| 22°C, 3.18 mm | 850 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Annealed | 85.5 | °C | |
| 1.8 MPa, Annealed | 82.5 | °C | |
| Vicat Softening Temperature | 97.8 | °C | ASTM D1525 1 |
| RTI Elec | 50.0 | °C | UL 746 |
| RTI Imp | 50.0 | °C | UL 746 |
| RTI Str | 50.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 | |
| Flame Spread Index | RP-35 | ASTM D162 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULADUR® A GF 30 SF | A. Schulman Europe | PBT | SCHULADUR® |
| Hifax HSBM CB 1159 G | LyondellBasell Industries | PP Impact Copolymer | Hifax |
| K-Prene GHT 75 | Technovinyl Polymers India Ltd. | TPE | K-Prene |
| Iupilon® TMB1412 | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
| Latilub 66-15T K/30 | LATI S.p.A. | Nylon 66 | Latilub |
