Order Products : sales@su-jiao.com
Vydyne® 88X-D
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Ascend Performance Materials Operations LLC |
| Trademark: | Vydyne® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Sn3a94_Vydyne-88X-D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vydyne 88X-D is medium-viscosity PA66/6 random copolymer used for injection-molding applications. It provides benefits of high flow, fast cycles and good surface finish of the final parts. This copolymer is specifically designed to be used in application that requires high strength, good toughness, good surface lubricity and abrasion resistance. Vydyne 88X-D is available in natural color, and it is the product of choice for low-yellowness-required applications. Vydyne 88X-D maintains the chemical resistance typical of PA66/6 to many chemicals, machine and motor oils, solvents and gasoline. Typical Applications/End Uses: Vydyne 88X-D has been used in many injection-molding applications such as cable ties/tie straps, terminal blocks, bearings, bushings, cams, electrical connectors and housings and many other hardware and general consumer-industrial parts. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.14 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 23°C, 2.00 mm | 1.8 | -- | % | |
| Flow : 23°C, 2.00 mm | 1.8 | -- | % | |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 1.4 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.8 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 3400 | 1800 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | |||
| Yield, 23°C | 86.0 | 60.0 | MPa | |
| Break, 23°C | 50.0 | 40.0 | MPa | |
| Tensile Strain (Yield, 23°C) | 5.0 | 10 | % | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | 27 | > 50 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2900 | 980 | MPa | ISO 178 |
| Flexural Strength (23°C) | 90.0 | 30.0 | MPa | ISO 178 |
| Poisson's Ratio | 0.40 | -- | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 5.0 | 5.0 | kJ/m² | |
| 23°C | 6.0 | 30 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ||
| 23°C | No Break | No Break | ||
| Notched Izod Impact Strength | ISO 180 | |||
| -30°C | 5.0 | 5.0 | kJ/m² | |
| 23°C | 6.0 | 30 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 183 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 62.0 | -- | °C | ISO 75-2/A |
| Melting Temperature | 253 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow : 23 to 55°C, 2.00 mm | 1.0E-4 | -- | cm/cm/°C | |
| Transverse : 23 to 55°C, 2.00 mm | 1.0E-4 | -- | cm/cm/°C | |
| RTI Elec | UL 746 | |||
| 0.400 mm | 130 | -- | °C | |
| 0.710 mm | 130 | -- | °C | |
| 1.50 mm | 130 | -- | °C | |
| 3.00 mm | 130 | -- | °C | |
| RTI Imp | UL 746 | |||
| 0.400 mm | 75.0 | -- | °C | |
| 0.710 mm | 75.0 | -- | °C | |
| 1.50 mm | 75.0 | -- | °C | |
| 3.00 mm | 75.0 | -- | °C | |
| RTI Str | UL 746 | |||
| 0.400 mm | 75.0 | -- | °C | |
| 0.710 mm | 85.0 | -- | °C | |
| 1.50 mm | 85.0 | -- | °C | |
| 3.00 mm | 85.0 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity (0.750 mm) | 1.0E+10 | -- | ohms·cm | IEC 60093 |
| Dielectric Strength (1.00 mm) | 26 | -- | kV/mm | IEC 60243 |
| Arc Resistance (3.00 mm) | PLC 5 | -- | ASTM D495 | |
| Comparative Tracking Index (3.00 mm) | 600 | -- | V | IEC 60112 |
| High Amp Arc Ignition (HAI) | UL 746 | |||
| 0.710 mm | PLC 0 | -- | ||
| 1.50 mm | PLC 0 | -- | ||
| 3.00 mm | PLC 0 | -- | ||
| High Voltage Arc Tracking Rate (HVTR) | PLC 0 | -- | UL 746 | |
| Hot-wire Ignition (HWI) | UL 746 | |||
| 0.710 mm | PLC 4 | -- | ||
| 1.50 mm | PLC 3 | -- | ||
| 3.00 mm | PLC 3 | -- |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.400 mm | V-2 | -- | ||
| 0.710 mm | V-2 | -- | ||
| 1.50 mm | V-2 | -- | ||
| 3.00 mm | V-2 | -- | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 0.710 mm | 800 | -- | °C | |
| 1.50 mm | 800 | -- | °C | |
| 3.00 mm | 930 | -- | °C | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 0.710 mm | 700 | -- | °C | |
| 1.50 mm | 700 | -- | °C | |
| 3.00 mm | 700 | -- | °C | |
| Oxygen Index | 28 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | < 70.0 | °C | |
| Drying Time | 1.0 to 3.0 | hr | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 250 to 270 | °C | |
| Middle Temperature | 260 to 275 | °C | |
| Front Temperature | 270 to 280 | °C | |
| Nozzle Temperature | 270 to 290 | °C | |
| Processing (Melt) Temp | 275 to 290 | °C | |
| Mold Temperature | 65.0 to 95.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unigel PS U285 | Unigel Plásticos | PS (GPPS) | Unigel PS |
| ALCUDIA® HDPE R4805D1 | REPSOL | HDPE | ALCUDIA® HDPE |
| HOPELEX PC-1070S | Lotte Chemical Corporation | PC | HOPELEX |
| RONFALIN® ASA 3324 U | A. Schulman Europe | ASA | RONFALIN® |
| LNP™ THERMOCOMP™ RF009H compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
