Order Products : sales@su-jiao.com
StarFlex P 7145-1000
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | STAR Thermoplastic Alloys & Rubbers, Inc. |
| Trademark: | Starflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Sfu7f5_StarFlex-P-7145-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
StarFlex P 7145-1000 is an easy processing TPE designed for injection molding. Features -Soft Touch -Rubbery Feel -Excellent Colorability -Good Weatherability |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain, 23°C) | 1.21 | MPa | ASTM D412 |
| Tensile Strength (Yield, 23°C) | 3.33 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 820 | % | ASTM D412 |
| Tear Strength | 14.0 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (210°C, 11000 sec^-1) | 6.40 | Pa·s | ASTM D3835 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-1950-60A/B | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Unichem 82-378-D | Colorite Polymers | PVC, Unspecified | Unichem |
| AMTOPP SP50 | Inteplast Group | PP, Unspecified | AMTOPP |
| ICORENE® 8040 WS | ICO Polymers EMEA, A Division of A. Schulman | HDPE | ICORENE® |
| Plexiglas® Hi-Gloss NTA-1 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
