Europrene® N 3380 GRN

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SfcyBy_Europrene-N-3380-GRN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 3380 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3380 GRN is characterised by excellent tear resistance at high temperature, excellent dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Technical goods with outstanding mechanical properties, very low compression set and oil resistance.

Message

Europrene® N 3380 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 3380 GRN is characterised by excellent tear resistance at high temperature, excellent dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

Technical goods with outstanding mechanical properties, very low compression set and oil resistance.

General Information
Additive	Antioxidant
Features	Antioxidant Fast Cure Fuel Resistant Good Dimensional Stability Good Tear Strength Low Compression Set Low Temperature Flexibility Oil Resistant
Appearance	Yellow
Forms	Bale

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	80	MU	ASTM D1646
Acrylonitrile Content	33.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
SUPRAN® LFT PP 1340E	SAMBARK	PP, Unspecified	SUPRAN® LFT PP
Versollan™ OM 1262NX-1	PolyOne Corporation	TPE	Versollan™
Gallonprene® GP550-6504	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
LITEN FB 29	UNIPETROL RPA	PE Copolymer	LITEN
OnForce™ LFT SF-40LCF/000 Black	PolyOne Corporation	PPS	OnForce™ LFT