Order Products : sales@su-jiao.com
Perlast® ICE G75LT
| Category: | Perfluoroelastomer , Perfluoroelastomer |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Perlast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SfHI44_Perlast-ICE-G75LT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F). Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals. Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully moulded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes. Key Attributes
Typical Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 | ASTM D2240, ISO 7619 | |
| IRHD Hardness | 75 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 7.20 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 12.0 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 150 | % | ASTM D412, ISO 37 |
| Compression Set | ASTM D395, ISO 815 | ||
| 200°C, 70 hr | 20 | % | ASTM D395, ISO 815 |
| 200°C, 672 hr | 45 | % | ASTM D395, ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -33.0 | °C | ASTM D3418 |
| Maximum Operating Temperature | 250 | °C | |
| Coefficient of Linear Thermal Expansion | 3.40E-4 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Resistance - TR10 | -32 | °C | ASTM D1329 |
| Minimum Operating Temperature: -46°C (-51°F) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Viprene™ P80A-22U-NAT | Alliance Polymers & Services | TPV | Viprene™ |
| ENVIROLOY® ENV15-NC370 | ENVIROPLAS®, Inc. | PC+ABS | ENVIROLOY® |
| Hanwha Total PP GB71 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| POLYCOMPO PP E110G | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
| ESTOPLAST SR 1500IY01 | Ester Industries Ltd. | ABS | ESTOPLAST SR |
