Order Products : sales@su-jiao.com
Devcon FasMetal™ 10 HVAC Repair
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Sa07N0_Devcon-FasMetal-10-HVAC-Repair.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
An aluminum-filled, 1:1 mix epoxy packaged in 6 1/2 oz. tube kit for repairs to copper coils in HVAC equipment. Intended Use:
Product Features:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.72 | g/cm³ | |
| Specific Volume | 0.582 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Temperature Resistance | |||
| Dry | 121 | °C | |
| Wet | 43 | °C | |
| Tensile Shear Adhesion | 17.2 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.080 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5380 | MPa | ASTM D638 |
| Flexural Strength | 43.2 | MPa | ASTM D790 |
| Compressive Strength | 58.1 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 5.2E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.72 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 3.9 | kV/mm | ASTM D149 |
| Dielectric Constant | 21.4 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 0.90 Mixing ratio by capacity: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Pot Life (24°C) | 60 | min | |
| Thermoset Mix Viscosity | 40000 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time | 16 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 FRC 2 TS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Sylvin 7403-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ALTECH® PC C 2015/509 GF15 | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
| ASTALOY™ PC/PET C70H20 | Marplex Australia Pty. Ltd. | PC+PET | ASTALOY™ |
| CompaDur® 125 GF 30 natural (016) | DimeLika Plast GmbH | PBT+PET | CompaDur® |
