Order Products : sales@su-jiao.com
Elastollan® 1175 A W
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SVuDpF_Elastollan-1175-A-W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Polyether Polyurethane Elastomers with outstanding hydrolysis resistance, low temperature flexibility and resistance to micro-organisms. Typical applications Cable jackets, plugs and terminations, spiral tubing, Films, ski-boot shells, ear tags, technical mouldings like mining screens, railway pads, seals. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 75 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 45.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| 20% Strain | 2.00 | MPa | |
| 100% Strain | 4.00 | MPa | |
| 300% Strain | 8.00 | MPa | |
| Tensile Stress | DIN 53504 | ||
| Yield 1 | 28.0 | MPa | |
| Yield | 40.0 | MPa | |
| Tensile Elongation | DIN 53504 | ||
| Break 2 | 750 | % | |
| Break | 700 | % | |
| Tear Strength 3 | 40 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 20 | % | |
| 70°C, 24 hr | 40 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| -- 4 | V-2 | ||
| -- | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 240 | °C | |
| Mold Temperature | 20.0 to 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 160 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | after storage in water at 80°C for 42 days |
| 2 . | after storage in water at 80°C for 42 days |
| 3 . | Method Bb, Angle (Nicked) |
| 4 . | according to wall section |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SWANCOR Epoxy 977-S | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| TOTAL Polystyrene Impact 3441 | TOTAL Refining & Chemicals | PS (HIPS) | TOTAL Polystyrene |
| TRIBOCOMP® PP-C LGF30 TS12 | EPIC Polymers | PP, Unspecified | TRIBOCOMP® |
| Fainplast PVC RE 130 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| K-vinyl 70 Deg C Rating Insulation (75-Wet) | Technovinyl Polymers India Ltd. | PVC, Unspecified | K-vinyl |
