Order Products : sales@su-jiao.com
ESPOLEX 907
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Sumitomo Chemical America, Inc. |
| Trademark: | ESPOLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SVapPg_ESPOLEX-907.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESPOLEX 907 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. ESPOLEX 907 application areas include engineering/industrial accessories, automotive industry, handles and sporting goods. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 350 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 11.0 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 15.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 700 | % | ISO 37 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 4 | ISO 179 | ||
| -30°C | 15 | kJ/m² | ISO 179 |
| 23°C | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature (Type A) | < -60.0 | °C | ISO 812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 243 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Pressure: HighPack/Hold Pressure: 40-70% of Inj PressScrew RPM: SlowPart Draft: 3-6° per sideTool Surface Finish: Light Texture |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500mm/min |
| 2 . | Type 1A, 500mm/min |
| 3 . | Type 1A, 500mm/min |
| 4 . | Thickness: 3.2 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ HU1110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Adstif HA849K | HMC Polymers | PP Homopolymer | Adstif |
| Clariant Nylon 6 PA-211N40 | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| DIAMALOY ASAPC GLY 130 | Network Polymers, Inc. | ASA+PC | DIAMALOY ASAPC |
| Lupox® TE5000D | LG Chem Ltd. | PC+PBT | Lupox® |
