Order Products : sales@su-jiao.com
Chemlon® 109 U
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Teknor Apex Company (Chem Polymer) |
| Trademark: | Chemlon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SN89Co_Chemlon-109-U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Chemlon® 109 U is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Chemlon® 109 U are:
Typical application of Chemlon® 109 U: Automotive |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 1.5 to 2.0 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.80 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 45 | % | ISO 527-2 |
| Flexural Modulus | 1700 | MPa | ISO 178 |
| Flexural Stress | 65.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| -40°C | 20 | kJ/m² | |
| 23°C | 95 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 52.0 | °C | ISO 75-2/A |
| Melting Temperature | 261 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ISO 1325 |
| Dielectric Strength (3.00 mm) | 17 | kV/mm | ASTM D149 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.810 mm) | HB | UL 94 | |
| FMVSS Flammability | PASSES | FMVSS 302 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.20 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 265 to 285 | °C | |
| Middle Temperature | 265 to 290 | °C | |
| Front Temperature | 265 to 295 | °C | |
| Nozzle Temperature | 265 to 285 | °C | |
| Processing (Melt) Temp | 270 to 295 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PPR HDPE02 | Premier Plastic Resins, Inc. | HDPE | PPR |
| Hytrel® 4056 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| Optix® CA-990 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| Polidan® T/A-LV | Solvay Specialty Polymers | XLPE | Polidan® |
| Braskem PE HDP0353 | Braskem IDESA | HDPE | Braskem PE |
