Order Products : sales@su-jiao.com
Estane® CP80AS2 TPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SMsyiu_Estane-CP80AS2-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® CP80AS2 TPU is a soft, polyester based thermoplastic polyurethane resin. Features: Outstanding compatibility with flexible PVC allowing easy dispersion without pre-compounding. Uses: Tube/Hose & Sheet Extrusion, Wire/Cable |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 14.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.90 | MPa | ASTM D412 |
| 300% strain | 8.40 | MPa | ASTM D412 |
| Tensile Strength (Break) | 28.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 470 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 61.8 | kN/m | ASTM D624 |
| Cracking | 22 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -30.0 | °C | DSC |
| Melting Temperature | 140 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 | °C | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 175 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Adapter Temperature | 180 | °C | |
| Die Temperature | 180 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene T20P100-837UV | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| RTP 102 SP | RTP Company | PP, Unspecified | RTP |
| Borealis PP HC101BF | Borealis AG | PP Homopolymer | Borealis PP |
| Fainplast PVC MRK 267 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Dow Corning® MG 7-9800 | Dow Corning Corporation | Silicone | Dow Corning® |
