Order Products : sales@su-jiao.com

BITONER® BT-100

Category:	TP, Unspecified , Thermoplastic
Manufacturer:	Qingdao Bater Chemical Co., Ltd.
Trademark:	BITONER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SL6uUT_BITONER-BT-100.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
BITONER BT-100 is thermoplastic, low molecular weight, slightly yellow aliphatic resin. With good affinity with a wide range of fillers,it is used as a binder in thermoplastic road marking paints. Owing to its excellent tack and tack retention,it is also used in hot melt adhesives and sealants. This item is also used as processing and reinforcing agent in tyre and rubber compounds. Characteristics: Excellent affinity with wide range of fillers Low Molecular weight Good chemical stability Water resistance Applications: Hot Melt Adhesives Sealants Thermoplastic Road Marking Paints Rubber.

Message

BITONER BT-100 is thermoplastic, low molecular weight, slightly yellow aliphatic resin. With good affinity with a wide range of fillers,it is used as a binder in thermoplastic road marking paints.
Owing to its excellent tack and tack retention,it is also used in hot melt adhesives and sealants. This item is also used as processing and reinforcing agent in tyre and rubber compounds.

Characteristics:

Excellent affinity with wide range of fillers

Low Molecular weight

Good chemical stability

Water resistance

Applications:

Hot Melt Adhesives

Sealants

Thermoplastic Road Marking Paints

Rubber.

General Information
Features	Aliphatic Good Chemical Resistance Low Molecular Weight Low to No Water Absorption
Uses	Adhesives Asphalt Modification Paint Rubber Replacement Sealants Seals
Appearance	Yellow

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918 to 0.988	g/cm³	Internal Method
Acid Value	< 0.30	Mg KOH/g	ASTM D974
Color - 50% resin solid in Toluene	Max4#		ASTM D1544

Thermal	Nominal Value	Unit	Test Method
Softening Point ¹	95 to 105	°C	ASTM E28

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (200°C)	< 200	mPa·s	ASTM D3236

Note Message
1 .	Ring & Ball

Resin Grade	Manufacturer	Category	Trademark
WPP PP PRC25GF3-Black	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
DIC.PPS CZL-2000	DIC Corporation	PPS	DIC.PPS
Elastron® G G101.D47.B	Elastron USA, Inc.	SEBS	Elastron® G
Hostacom PPU X9067HS DS2 Granitgra	LyondellBasell Industries	PP, Unspecified	Hostacom
Daelim Po1y® XP3200	DAELIM INDUSTRIAL CO., LTD.	mLLDPE	Daelim Po1y®