Order Products : sales@su-jiao.com
MARPOL® LDM 790
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SIF8AB_MARPOL-LDM-790.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Recommended Applications Injection molding, compounding, and industrial coatings Description MARPOL® LDM 790 is a low density polyethylene resin designed for tubular processing. This resin offers an excellent balance of processability and end use performance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 99 | ||
| Shore D | 42 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 13.8 | MPa | |
| Break | 6.89 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 30 | % | |
| Break | 200 | % | |
| Flexural Modulus - 1% Secant | 234 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| -58°C | 17.6 | J | |
| -20°C | 23.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 86.1 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TW200FM33 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| YUNTIANHUA® CM90 | YunNan YunTianHua Co., Ltd. | Acetal (POM) Copolymer | YUNTIANHUA® |
| Hyundai EP PA66 LD440 | HYUNDAI EP Co., Ltd. | Nylon 66 | Hyundai EP PA66 |
| POLYblend PC/ABS 65 M10 | Polykemi AB | PC+ABS | POLYblend |
| ALTECH® PP-H B 4920/500 MR20 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
