Order Products : sales@su-jiao.com
Westlake LDPE EP310
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SGk7sM_Westlake-LDPE-EP310.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE polyethylene EP310 is a low-density polyethylene suggested for cast film bakery applications. This material has outstanding optical and processing properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 2.2 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 186 | MPa | |
| 1% Secant, TD | 228 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 23.4 | MPa | |
| TD : Break | 22.1 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 580 | % | |
| TD : Break | 750 | % | |
| Dart Drop Impact | 100 | g | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 80 | ASTM D2457 | |
| Haze | 3.8 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 10 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| DuraSurf™ 4001 DuraJet | Crown Plastics | UHMWPE | DuraSurf™ |
| Geon™ Vinyl Flexible 90043 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| EPIGUM OR/87 | Crosspolimeri S.p.A. | TPV | EPIGUM |
| Plaslube® J-1/30/TF/22 NAT | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
