Order Products : sales@su-jiao.com

TOTAL Polyethylene XSene® HDPE XLS 12 B

Category:	HDPE , High Density Polyethylene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polyethylene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SGAFQM_TOTAL-Polyethylene-XSene-HDPE-XLS-12-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HDPE XLS 12 B is a high performance hexene-based black compound, with a MRS 10 MPa - PE 100 classification, and primarily intended for extrusion of large diameter and thick wall pressure pipes. HDPE XLS 12 B key characteristics are a superior resistance to sagging, enabling the manufacture of very thick wall pipes with even wall thickness distribution an outstanding resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation an optimised formulation of additives and finely dispersed carbon black providing outstanding long-term stability in service.

Message

HDPE XLS 12 B is a high performance hexene-based black compound, with a MRS 10 MPa - PE 100 classification, and primarily intended for extrusion of large diameter and thick wall pressure pipes.

HDPE XLS 12 B key characteristics are

a superior resistance to sagging, enabling the manufacture of very thick wall pipes with even wall thickness distribution

an outstanding resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation

an optimised formulation of additives and finely dispersed carbon black providing outstanding long-term stability in service.

General Information
Additive	Carbon Black
Features	Durable Good Crack Resistance Hexene Comonomer
Uses	Fittings Piping
Agency Ratings	EC 1907/2006 (REACH)
Appearance	Black
Processing Method	Injection Molding Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.959	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	0.20	g/10 min	ISO 1133
Carbon Black Content	2.0 to 2.5	%	ISO 6964
Carbon Black Dispersion	< 3		ISO 18553
Water Content	< 300	ppm	EN 12118

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (200°C)	> 20	min	ISO 11357-6

Additional Information	Nominal Value		Test Method
ISO Type	PE,E/M-ACGHL,50-T003		ISO 1872

Injection	Nominal Value	Unit
Suggested Max Moisture	0.030	%
Processing (Melt) Temp	200 to 260	°C

Extrusion	Nominal Value	Unit
Suggested Max Moisture	0.030	%
Melt Temperature	190 to 220	°C

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS LRX821	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
ExxonMobil™ LLDPE LL 1001XV Wire & Cable	ExxonMobil Chemical	LLDPE	ExxonMobil™ LLDPE
Hostaform® C 9021 TF5	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
Hylex® P1025G20FRMA	Ravago Manufacturing Americas, LLC	PC	Hylex®
Iupiace® GX1050	Mitsubishi Engineering-Plastics Corp	PPE+PS	Iupiace®