Order Products : sales@su-jiao.com
Thermoset Plastics 125
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SF2dGv_Thermoset-Plastics-125.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 125 is an Epoxy; Epoxide (Epoxy) material filled with aluminum. It is available in North America. Primary attribute of Thermoset Plastics 125: Good Adhesion. Typical application of Thermoset Plastics 125: Adhesives/Tapes |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.55 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 46.9 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 72.1 | MPa | ASTM D790 |
| Compressive Strength | 88.6 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 1.0 Mix Ratio by Volume: 1.0 | ||
| Demold Time (25°C) | 720 to 960 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-709H | CHI MEI CORPORATION | ABS | POLYLAC® |
| AMTOPP WA25 | Inteplast Group | PP, Unspecified | AMTOPP |
| Greenflex® FF 35 | Versalis S.p.A. | EVA | Greenflex® |
| MAJ'ECO GEP070MHA | AD majoris | Biodeg Polymers | MAJ'ECO |
| Domamid HT™ 7750R60H3 | Technical Polymers, LLC | Nylon 66 | Domamid HT™ |
