Order Products : sales@su-jiao.com
Moplen HP522H
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SEFLLt_MoplenHP522H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen HP522H is a polypropylene homo-polymer for the production of biaxially oriented polypropylene films .The product is particularly suitable for metallization, both as monolayer film & in co-extruded structures. Moplen HP522H has been designed to provide a very stable extrusion on stenter lines & to give excellent thickness control, increased draw ability & readiness to a two way orientation. Moplen HP522H contains a reinforced processing stabilisation but does not contain any slip or anti blocking agents .The product features low water carry-over properties & is therefore also suitable for tubular BOPP .BOPP films produced with Moplen HP522H features good mechanical properties ,high impact strength & puncture resistance ,even at low temperatures .The films form an excellent barrier against moisture ,odours ,oils ,fats & oxidation & feature good optical properties .Monolayer or co-extruded films made of Moplen HP522H with a thickness ranging from 20 to 40 µm are used for the packaging of foodstuffs ,cosmetics & videocassettes .Metallized BOPP films made with Moplen HP522H are also suitable for lamination to other flexible films. * Moplen HP522H is suitable for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 55 | J/m | ASTM D256 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oven Aging (150°C) | 15.0 | day | ASTM D3012 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 92.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® VE720 | A. Schulman Europe | ABS | RONFALIN® |
| SLOVAMID® 66 GF 30 FRG 5 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Braskem PP CP250H | Braskem America Inc. | PP Homopolymer | Braskem PP |
| SHINSTRA AG35TKB (PA66) | Shinil Chemical Industry Co., Ltd. | Nylon 66 | SHINSTRA |
| Osterlene® LD07520A | Osterman & Company | LDPE | Osterlene® |
