Order Products : sales@su-jiao.com
INEOS PP R35C-00
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SDyOzx_INEOS-PP-R35C-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| R35C-00 is a high flow rate, high clarity random copolymer. In addition to clarity, its benefits include rapid molding cycles and good impact at room and refrigerator temperatures. It meets the requirements of the U.S. Food and Drug Administration, as specified in 21 CFR 177.1520. Typical applications are thin-wall rigid packaging, consumer products, housewares and medical items. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.903 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 87 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 29.1 | MPa | |
| Break | 22.2 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 14 | % | |
| Break | 750 | % | |
| Flexural Modulus - 1% Secant 3 | 1070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 4°C | 32 | J/m | |
| 23°C | 48 | J/m | |
| Notched Izod Impact (Area) | ASTM D256 | ||
| 4°C | 3.00 | kJ/m² | |
| 23°C | 4.70 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 79.3 | °C | ASTM D648 |
| Vicat Softening Temperature | 131 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 96 | ASTM D2457 | |
| Haze 4(1270 µm) | 18 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GA-5033LT | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| SUMIKASUPER® LCP E6310C | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| 3M™ Dyneon™ Fluoroplastic PVDF 315080003 | 3M Advanced Materials Division | PVDF | 3M™ Dyneon™ Fluoroplastic |
| CABELEC® CA4857 | Cabot Corporation | PS (GPPS) | CABELEC® |
| HONES® PBT GF10 | Guangdong Shunde Hones Polymer Material Co., Ltd. | PBT | HONES® |
